140
140° circular
Symmetric
Clear
Measured, BRX3-100-730-140
Commercial · Canopy
Ip65 surface-mount LED Canopy Light ideal
Car Park Canopy Light
- 40W to 100W
- 6,160lm to 14,400lm
- 141 to 154lm/W
- IP65
- 5 Years warranty
Order code BRX3-60-740-140-D1-BL
No lumen is published for that combination.
Measured file BRX3-60-740-140: 9,334 lm at 60.48 W (154.3 lm/W).
60W nominal. 252 × 283 × 93 mm, 1 module, 2.08 kg. Driver Contact the office for driver parameters. CE, ETL, DLC.
- 154 lm/W
The Broxburn Series of LED car park canopy lights are designed to be a compact alternative to traditional linear fittings; capable of delivering required lux levels, while maximising vehicle head-room.
Supplied with a 120° or 140° optic, and available in outputs from 40W to 100W (lumen output up to approximately 14,400lm), it can deliver high levels of uniformity from low mounting heights, as are typically found in multi-storey and underground car parks.
The Broxburn series is available with 3 hour maintained emergency, ensuring the car park remains appropriately illuminated for safe exit in the event of a power cut.
Additional safety and energy-saving options include the multi-step dimming sensors which can be set to always provide a minimum light level, e.g. 10% at all times, lowering running costs, while recognising the benefit of constant illuminance.
The Broxburn Series is also well-suited for chiller rooms and cold stores. An emergency variant is available as a remote battery pack, where the batteries can be housed outside the chilled environment, maximising product longevity, and minimising maintenance costs.
| Series code | BRX3 |
|---|---|
| Nominal power | 40W to 100W |
| Efficacy | 141 to 154lm/W @ CRI>70, 5000K |
| Lumen output | 6,160lm to 14,400lm @ CRI>70, 5000K |
| Lumen maintenance | L70B50 ≥167,500 hours @ Ta 25°C |
| Certification | CE, ETL, DLC |
| Warranty | 5 Years |
Sheet lumen at CRI>70, 5000K, with no modification: 40 6,160 lm, 60 8,460 lm, 80 12,000 lm, 100 14,400 lm. Another CRI, or a modification, still prints the order code and leaves the lumen blank. 12 measured files give 133 to 162.5 lm/W; the measured figure for the chosen optic shows under the code.
DOWNLOADS
Questions for Adam list what the sheet and the measured files do not settle yet.
LIGHT DISTRIBUTION OPTIONS
Polar: solid green C0–C180, dashed blue C90–C270, dotted amber the plane through the brightest direction when it lies between them; rings at 25% steps of the peak. Isolux: the footprint on the floor with the fitting aimed straight down, contours at 50%, 25% and 10% of the brightest point, grid in mounting heights (H). Both are drawn from the first measured file for that optic.
DESIGN FEATURES
Canopy lights designed for Purpose
Compact maintenance-friendly housing, surge protection, and corrosion-resistant surface-finish, ensures product longevity. High efficacy and emergency compatibility reduces total project costs by reducing the number of fittings required and avoiding the need for non-maintained emergency lights. Chip: The Broxburn Series utilises the Nichia GRT-V3 which provides >141lm/w across all wattages. 3Hr Emergency and Smart Controls: Available with a plug-and-play multi-step dimming occupancy sensor or DALI dimmable drivers. Additionally, 3 hour remote-test maintained emergency can provide the necessary illuminance in the event of a power failure. Operations temperature: It has an operational temperature of -30°C to 50°C, ensuring suitability for both internal, external, and a wide range of temperature-controlled facilities such as chiller rooms. Corrosion resistance: IP65 fitting and comes with corrosion resistant powder coated finish. User Friendly Design: Supplied with a neoprene backing bad for direct-mounting onto rough surfaces, and rear threaded cable entry for conduit or pole mount. Easy access to internal components via hinged front face, makes installation efficient and easy.
TYPICAL APPLICATIONS
Car Park
For car parks, Kellwood Lighting has considerable experience and offer a comprehensive range of robust, energy saving LED Lighting Solutions across the UK.
Cold Stores
We design and supply specific cold store lighting solutions to ensure suitable ingress protection, optimising light longevity at low temperatures.
Freezers
Lighting solutions for industrial freezers, temperatures of 0 to -40°C. LEDs with high IP rating, optional remote control gear and surface-mount brackets.
- Petrol Station
- Canopy
- Garages
GALLERY
Showing 1-4 of 5
SPECIFICATIONS
| Light Emission | Direct |
|---|---|
| CCT | 3000K, 4000K, 5000K |
| CRI | ≥70 |
| SDCM | <5 |
| Diffusers | Clear |
| Symmetric Light Distribution | 140° circular; 120° with the polycarbonate reflector (PCR) |
| System Operating Power | BRX3-40: 40W; BRX3-60: 60W; BRX3-80: 80W; BRX3-100: 100W |
|---|---|
| Input Frequency | 50-60Hz |
| Power Factor | >0.97 |
| THD | <15% @ 120-277V |
| Insulation Class | Class I |
| Surge Protection/Fusing | 6kV line-line, 6kV line-earth |
| IP Rating | IP65 |
|---|---|
| IK Rating | IK08 (the cover says IK10) |
| Ambient Usage Tolerance | -30°C to 50°C |
| Ambient Storage Tolerance | -30°C to 50°C |
| Product Dimensions: LxWxH (mm) | BRX3-40 and BRX3-60: 252 x 283 x 93; BRX3-80 and BRX3-100: 300 x 332 x 93 |
|---|---|
| Qty of Modules | 1 |
| Electrical Connection | Terminal Block |
| Fixture Weight (excludes bracketry) | BRX3-40 and BRX3-60: 2.08kg; BRX3-80 and BRX3-100: 2.76kg |
| Fixture Primary Material(s) | Aluminium Alloy |
| Fixture Finish | Powder Coating |
| Lens(es) Materials | UV Stabilised Polycarbonate |
| Dimming Options | 1-10V (D2); the specification page also lists 0-10V and DALI |
|---|---|
| Built-in Controls | PIR Sensor, Microwave Sensor |
| Mounting Styles | Surface mounted |
|---|---|
| Available Product Colours | Black |
| 40 | 40W nominal. 252 × 283 × 93 mm, 1 module, 2.08 kg. Driver Contact the office for driver parameters. CE, ETL, DLC. |
|---|---|
| 60 | 60W nominal. 252 × 283 × 93 mm, 1 module, 2.08 kg. Driver Contact the office for driver parameters. CE, ETL, DLC. |
| 80 | 80W nominal. 300 × 332 × 93 mm, 1 module, 2.76 kg. Driver Contact the office for driver parameters. CE, ETL, DLC. |
| 100 | 100W nominal. 300 × 332 × 93 mm, 1 module, 2.76 kg. Driver Contact the office for driver parameters. CE, ETL, DLC. |
Lumen figures are for CRI>70, 5000K.
PCR adds a polycarbonate reflector for a 120° distribution; it has its own photometric files (+PCR).
If more than one modification is required, separate each modification with a hyphen at the end of the product code.
Select a compatible driver for occupancy sensors with dimming.
Alternative drivers may be available. Contact the office for further details, including driver parameters.
