Industrial · Controls

Wireless Lighting Control Node

A combined wireless node with an in-built daylight-harvesting photocell, providing individual dimming control and monitoring for the connected luminaire.

From the powered DALI bus of a D4i driver (<10mA
5 Years warranty

Order code LC-LIP-ND3-ZB18-IR

Request a quote

A combined wireless node with an in-built daylight-harvesting photocell, providing individual dimming control and status monitoring for the connected luminaire.

Tool-free connection to a Zhaga Book 18 socket. Powered over D4i and suitable for wide range of products including street lights, floodlights, and bay lights.

The node includes non-volatile memory - it will retain individual settings, even after a power cut, but can be remotely re-programmed to accommodate a change of use in the the area.

Performance summary
Part codes	LC-LIP-ND3-ZB18-IR; LC-LIP-ND3-ZB18-IR-S2 (with PIR)
Compatible with	Wireless Pro wireless lighting controls
Power and dimming	From the powered DALI bus of a D4i driver (<10mA at 16V)
Communication	868MHz, 10mW (10dBm); up to 75m between nodes
IP rating	IP66 (standard and PIR versions)
Connection	Zhaga Book 18, tool-free
Warranty	5 Years

No lumen row is entered yet. The order code still prints; the lumen stays blank.

DOWNLOADS

Zhaga Book 18 node data sheet

Questions for Adam list what the sheet and the measured files do not settle yet.

DESIGN FEATURES

What are ZB18 nodes for?

A ZB18 node allows users to directly control the luminaire that is physically connected to it, monitor it's status. Depending ambient light level, the in-built photocell can automatically dim or turn off the light, saving money. The Zhaga Book 18 node only requires a D4i power supply; it gets this directly from the connected light's DALI2 D4i driver. The toolless connection makes it simple and cheap to install. The light only requires a 230VAC power supply making it the ideal "SMART" solution for retrofit projects. Other parts that can be included in the wireless control system include: Collator Emergency Wireless Photocells Tablet and Software Wireless Scene Switches Wireless Occupancy Sensors

CASE STUDIES

GALLERY

Showing 1-4 of 6

SPECIFICATIONS

Technical details
Ta / Tc	-20°C to +50°C / 65°C
Cover	Smoked grey polycarbonate, low profile
Sensors	Integral IR/daylight sensor and co-site filter; S2 or S4 PIR available
Base	Ø79.7mm Zhaga Book 18; pins 2 and 3 DALI (pins 1 and 4 not used)
Set-up	Light levels, fade rates and sensor settings from an Android tablet

Can also be used with a compatible DALI driver and DALI PSU. Observe DALI polarity.

The luminaire's Zhaga socket is not included.

Not Zhaga Book 18 DALI compliant, so it cannot be used with DALI PIRs.

With a central battery system, extra Kellwood hardware is needed; talk to the office before specifying.